News:

Welcome to the new Track Trailer forum

Main Menu

Tvan hatch struts

Started by AndyRW, April 18, 2014, 10:00:55 PM

Previous topic - Next topic

AndyRW

Found one of the struts leaking oil so emailed Track trailer re replacement, surprise surprise, no answer from TT.
Seems to be a continuing theme with them.
Anyways,, Aussie Struts supply the struts to TT but the struts do not have any part numbers on them, but do have info regarding the length, diameter and I think it is newton metres of pressure, I seem to recall this as being 500n on the strut.
Aussie Struts have a strut the right length and diameter but there N reading is 50-1200.
Does anybody know if this would be suitable as it obviously covers the force required by TT for the hatch to open and should I be replacing the struts as a pair, I am leaning towards replacing both at the same time.

Cheers
Steve
Steve & Andy
2010 Murranji Tvan controlling a 2010 Mitsu Challenger

peterjantvan

The struts are $37 odd each from track.
Track now have an online store - it is on the website.
Check it out
Hope this helps
Peter
Peter and Jan
Melbourne
Nissan Patrol Wagon GU 2005 - 6.5 V8 Diesel Manual with lots of extras
2011 Tvan Murranji Mark 3 with some mods to make it even better than great

MYT150

All the info is on there website in the online shop.

http://tstore.tracktrailer.com.au/store/store/products/tvan-gas-strut/

When did you email them, as there are closed today, so I would hardly expect a reply today.
Aidan Cashman
Track Trailer Forum Administrator

Ram 2500 6.7L Diesel

The Hueys

Aussie Struts can pressurise the struts to suit the desired pressure, hence the range listed.

I would go for something a bit higher like 550 if you have to get custom made ones, but I would persist with Track and get the correct pressure from them.
Craig Hewitson
Former Track Trailer Service & Sales Manager - 2005 to 2011
MkII Tvan behind a Mazda BT-50

AndyRW

Thanks for the replies, will try the online store as first port of call.

I sent the email to TT service dept over a week ago.

Cheers
Steve
Steve & Andy
2010 Murranji Tvan controlling a 2010 Mitsu Challenger

wasp

For what it is worth. I had both of mine failing to hold the hatch up during a Cape York trip.

Upon return, I took them to Struts Australia in 1/16 Fitzgerald rd Laverton Nth. Melb.
They "tweaked" them up a few Nm, and all for free. Hatch now stays up quite well indeed.

There service was definatley 100% customer focused, even though I was prepared to buy new off them. 30yrs myself, in a customer industry, and I cannot recommend them enough for their service.
Gordon & Janet  '07 Canning with most bits.
Pushing an FZJ105 4.5 Inj.LPG with goodies.

davandeb

I had both hatch struts re-gassed in my garage by Struts Regassed 4 U for $99.  I have used this guy before to do the bonnet and rear window on the Landcruiser and recommend him to those located in the Melbourne area.  The more you get done the cheaper it is.  (Al = 0427 929 468)
2005 Land Cruiser TD Sahara<> 2007 Tvan Murranji MkII

AndyRW

Quote from: AndyRW on April 19, 2014, 05:19:35 PM
Thanks for the replies, will try the online store as first port of call.

I sent the email to TT service dept over a week ago.

Cheers
Steve

FYI, when I received the new struts from TT the NM have increased from 550nm on the original struts to 600nm on the new struts.
Steve & Andy
2010 Murranji Tvan controlling a 2010 Mitsu Challenger

The Hueys

The early Tvans had 500Nm struts but over the years extra windows in the tent, tropical roof catch nets and more recently lined hatches have all added weight to the hatch so the pressures have had to increase to cope with the extra weight.
Craig Hewitson
Former Track Trailer Service & Sales Manager - 2005 to 2011
MkII Tvan behind a Mazda BT-50