News:

Welcome to the new Track Trailer forum

Main Menu

Side Pockets for Mk II Tvan

Started by markeaust, May 15, 2016, 11:37:07 AM

Previous topic - Next topic

markeaust

G'Day All,

Just getting the Tvan ready for 3 months away and knocking over a few small jobs before we go.

One of the things I do notice is losing things down beside the bed.... ::)  I would love to have the side pockets, as you can get in the Mk III onwards, but I'm not too sure if they were available for the earlier models.  They are certainly not listed on the Track website for the Mk II.  Also the price may mean camping in the back yard instead of the Kimberley.... :o

I have the MSA4x4 canvas seat organisers for the kids in the car and I was wondering whether someone else had adapted something similar as a replacement of the side pockets on the Tvan.

Pics would be great too.... ;)

Cheers,

Mark
2003 HDJ100 Landcruiser
1996 Track Eagle
Aussie HFRC 3531, Austravel 3531 RFDS-9VNE


davidjw14

Have a look at these on eBay



Cheap and cheerful but they do the job

Otherwise I have a pair of new Track storage pockets that I bought but never installed on my Mk2. They are from a later model but can be fitted with a little fiddling around.  Make me an offer if you are interested


Sent from my iPhone using Tapatalk

batsy

Markeaust, our 2009 Mkii Canning has side nets as standard.
Will take some photos if needed but an email to TT should get the
answer you require.
Cheers
Batsy
80 Series 1hd-ft auto 40th Anniversary with a TVAN Canning

markeaust

Thanks Guys.....

The cheap eBay option is looking reasonable at this stage...the appear to simply velcro to the fabric.  Obviously not for heavy stuff, but for phones and other light stuff, should be OK.

I think the original TT ones will simply be too expensive... :o

Cheers,

Mark
2003 HDJ100 Landcruiser
1996 Track Eagle
Aussie HFRC 3531, Austravel 3531 RFDS-9VNE


turtles

Our 2009 Mk2 , bought second hand, was fitted with side pockets from the factory so I'm assuming TT did have them available as an option on models other than a Murranji which is our model. They are a great thing to have!
turtles aka Peter and Karen
2010 toyota prado with a 2009 Mk II Murranji

wolfgirlkitty

Our 2005 Mk 2, which we bought second hand, has the side pockets and roof pockets also.  They did have them, whether they still have any in stock would be anyone's guess.
Baron & Connie
Jeep Wrangler towing a 2005 TVan

Rob M

Mark,
Our Mark 2 Tvan Canning had side pockets fitted as standard. It also had overhead storage racks about 250 mm wide that ran down both sides of the bed.
Really good for storage on a long trip.
Maybe worth a call to Track to see if you can still get them.
Cheers
Rob
Previously 2009 Tvan Canning and now Topaz Series2 towed by Landcruier 200 series

Cruiser 105Tvan

Markeaust,

The Mk II Tvans did have the side pockets as an option.
The roof mounted storage is stretchy net with elasticated rope around the edge like the tent.
It's hung from eye hook type fittings and small fittings like draw handles(only a lot smaller, on the steel).

The pockets are held by stay puts on the upright aluminium forms that fit just beside the window, halfway along the side wall.
Normally used to hide the speaker wires and power wires for the outside kitchen light. 
And two more stay puts on the aluminium form that hides the wires for the reading lights, where they are mounted in the front corners.

Robert.
VK3PPC (Amateur).  VZU641 (Outpost LMR. Flying Doc. Radio sys.)
HDJ 105r with a 1HDFT, 2009 Canning MkII. Refurbed & pushing.

markeaust

Thanks All,

I will email TT and ask the question.

My Tvan does have the roof netting along each side of the bed and we really use this a lot.  I do think the side nets would be great for all the little nick-nacks that just seem to fall down beside the bed.

I have ordered one of those cheapo eBay nets just to see whether this will work as a starting point.

Thanks again for all the replies.

Cheers,

Mark
2003 HDJ100 Landcruiser
1996 Track Eagle
Aussie HFRC 3531, Austravel 3531 RFDS-9VNE


The Hueys

Here's a random pic of the MkII side wall pockets from the web. I searched Google images for "Tvan side wall pockets"

Track may or may not have old stock. You could probably get someone to make some up based on the pics if they don't.
Craig Hewitson
Former Track Trailer Service & Sales Manager - 2005 to 2011
MkII Tvan behind a Mazda BT-50

markeaust

Thanks Craig,

I have someone in mind who may well be able to make something similar up, but I will contact Track first to check for old stock.....

Cheers,

Mark
2003 HDJ100 Landcruiser
1996 Track Eagle
Aussie HFRC 3531, Austravel 3531 RFDS-9VNE


davidjw14

I have a new set I never installed.  Cost $180 from Trak.  Sell for $120


2016 Disco / 2011 Mk2

Cruiser 105Tvan

Quote from: davidjw14 on May 19, 2016, 05:08:55 PM
I have a new set I never installed.  Cost $180 from Trak.  Sell for $120


2016 Disco / 2011 Mk2

Even if you purchase the pockets, you still have to have the anchoring installed on the walls.
Even if you only need to fit the stayput fittings. 
Make sure you get metal stayputs. The plastic ones don't last.
Robert.
VK3PPC (Amateur).  VZU641 (Outpost LMR. Flying Doc. Radio sys.)
HDJ 105r with a 1HDFT, 2009 Canning MkII. Refurbed & pushing.

markeaust

#13
Quote from: davidjw14 on May 19, 2016, 05:08:55 PM
I have a new set I never installed.  Cost $180 from Trak.  Sell for $120


2016 Disco / 2011 Mk2

Interested, David.

I have to come over to Hawthorn next week, so can have a look and possibly take them off your hands if that suits you.

I will PM you my mobile phone number to make suitable arrangements.

Forum is a winner again....  :D :D :D

Cheers,

Mark



2003 HDJ100 Landcruiser
1996 Track Eagle
Aussie HFRC 3531, Austravel 3531 RFDS-9VNE


The Hueys

Quote from: Cruiser 105Tvan on May 20, 2016, 01:48:11 AM
Even if you purchase the pockets, you still have to have the anchoring installed on the walls.
Even if you only need to fit the stayput fittings. 
Make sure you get metal stayputs. The plastic ones don't last.

Easy to fit as the stayputs just rivet to the wall stiffeners with 1/8 rivets on a MkI & MkII. It's just a matter of holding up the pocket into a place you are happy with (parallel to the floor), mark one top eyelet on the stiffener, line up and drill the holes, fit the stayput & pocket and use this to then mark the other top hole, fit it up and then do the bottom ones. Just take care drilling the front holes as the marker light & reading light wires are behind the wall stiffener. I might add that it is easier to do with the mattress out too, but not essential.

Plastic stayputs are OK for the wall pockets as they are out of the weather and don't carry a lot of load, but metal ones can't hurt.
Craig Hewitson
Former Track Trailer Service & Sales Manager - 2005 to 2011
MkII Tvan behind a Mazda BT-50