Author Topic: Gas bottle relocation  (Read 1225 times)

Offline PJD

  • Full Member
  • ***
  • Posts: 29
  • Member
    • View Profile
  • Do you own a Track Product?: Mate
  • Location: Upper hunter valley
Gas bottle relocation
« on: February 28, 2017, 08:57:44 PM »
Decided to relocate gas bottles to side of mate as getting them out of the draw bar everytime we use the stove is a pain. Move the gas hose to be fixed to the stove and put male part of quick disconnect on gas reg as this makes it easier to connect as fitting in not under pressure and reminds me to turn tap off when I disconnect.

Removed gas bottle hold down bracket from tray in draw bar which has given me some extra storage that is out of site for my chain saw in its transit bag. Plastic box is only for reference don't think it would last there.

Offline PJD

  • Full Member
  • ***
  • Posts: 29
  • Member
    • View Profile
  • Do you own a Track Product?: Mate
  • Location: Upper hunter valley
Re: Gas bottle relocation
« Reply #1 on: February 28, 2017, 09:01:20 PM »
1

Offline PJD

  • Full Member
  • ***
  • Posts: 29
  • Member
    • View Profile
  • Do you own a Track Product?: Mate
  • Location: Upper hunter valley
Re: Gas bottle relocation
« Reply #2 on: February 28, 2017, 09:04:03 PM »
2

Offline zoom0001

  • Jr. Member
  • **
  • Posts: 11
  • Member
    • View Profile
  • Do you own a Track Product?: Not yet but interested in one
  • Location: Lilydale
Re: Gas bottle relocation
« Reply #3 on: March 03, 2017, 02:49:14 PM »
Not a bad idea, I was only thinking this the other day..

Offline PJD

  • Full Member
  • ***
  • Posts: 29
  • Member
    • View Profile
  • Do you own a Track Product?: Mate
  • Location: Upper hunter valley
Re: Gas bottle relocation
« Reply #4 on: March 07, 2017, 09:13:06 PM »
Two pieces of 32mm 3mm angle alloy 4 footmans loop or rest and reused the gas bottle ratchet straps. Hardest part was getting the ratchet straps to hold bottle down with no movement.