Adding an inverter and BCDC Charger

[Clayton]

Hi all,
I have recently purchased a MK4 Tvan and am planning on installing a Projector 300W inverter and Redarc BCDC1240D charger as they are currently absent. These components are the same as added by Track if selected as factory options, so I'm hoping the process is fairly simple.
Questing is does anyone have the wiring diagrams for the MK4, and the types of connectors used by Track. There seems to be spare plugs (Red and Black Battery Power) available in the control panel for adding devices, but I'm not sure that these plugs were intended for these items. Without stripping the wiring loom it is hard to see if these plugs are fed from the circuit breakers or direct to battery. The wiring looks a little small for the inverter (30A draw), and the 40A output from the charger. Also not totally sure where they change the feed from the draw bar into the charger rather than direct to the battery.
If anyone has any information about these items or photos of the original Track setup inside the panel it would be greatly appreciated!
I am probably going to have to strip it all apart, but hoping someone might have some info from doing this already.

[robstevens]

I can email this to you - Let me know...